Sunchonglic portable FMA-24V 30A three stage smart AGM GEL lead acid car battery charger
Product Photos
Related Products
₨9,000.00
Features:
The FMA series lead-acid battery charger is professional design according to the power battery of electric vehicles equipment.
It use the advanced soft switch technology,with small size,convenientinst allation,high conversion efficiency, running fully loaded for a long time,stable output current,large capacity,high reliability,long life features etc.
With short-circuited protection, low-voltage protection, over-heated protection. The long delay digital counter can ensure the battery from the constant voltage to the float charge reliably every time.Avoid the lost control of battery heat caused by the hight temperture. Let the damage of battery drop to the lowest caused by the dehydration and the polar plate vulcanize which are the two general problems of charger.
Specifications
| Technical Parameter | |
| Rated input voltage | AC 220V~ ±15% |
| Rated frequency | 47~63Hz |
| Charge current | 30A |
| Rated voltage | 24V |
| Charge mode | Three-stage |
| Power factor | ≥0.85 |
| Full load efficiency | ≥87% |
| Temperature range | -40 ~ +105℃ |
| Mechanical shock and quake-proof degree | Agree with the SAEJ1378 requirements. |
Based on 0 reviews
Be the first to review “Sunchonglic portable FMA-24V 30A three stage smart AGM GEL lead acid car battery charger”
Related products
-
Battery Chargers
SUOER SON-20A+ Fast Battery Charger Digital Display [12V – 24V]
Features:
- Max charging current:20A
- Rated input current:220V
- Adopt PWM charging mode, auto stop charging when the battery gets fully charged
- New LED screen display control panel
- 12V/24V manual switch(SON-20A+)
- Applicable for gel battery and lead-acid battery
SKU: 7959 -
Battery Chargers
DC-W1210A
Features:
- Fan control function
- Minimum starting voltage
- Reserve polarity protection
- Over-temperature protection
- LCD Display Screen
- Please confirm the type of battery before charging ,put the switch of battery type to the corresponding charge battery gear.The rechargeable battery connects to the AC power, The output clip needs to be correctly connected to the battery positive and negative terminal,then you can charge the battery
- Output DC 12V:This gear is just designed for the power adapter;it can output 12V for other electrical appliances.
- Gel 14.2V:This gear is designed for 12V sealed gel battery charger
- AGM 14.7V:The gear is designed for 12V sealed maintenance-free battery charger
- AQUEOUS 15.3V:This gear is designed for 12V lead acid battery charger
SKU: 44524 -
Battery Chargers
MA-2420 Battery Charger 24V
MA-2420 Battery Charger 24V
- Three-phase charging mode
- Constant current mode: When the voltage of the battery is lower than the value set by the charger, the charger will work under the constant current mode and supply the constant current for the battery.
- Constant voltage mode: Using the pulse width modulation(PWM) tech to control the charging current and output voltage of the charger which ensures the battery is fully charged and avoids over charging.
- Floating charge mode: When the voltage of the battery is approaching the value of the constant voltage mode, and the current will cut down to the given current gradually, that means the battery power is full, then the pilot lamp will turn green and the fan will stop working. The charger will turn the mode into floating charge mode automatically. At this moment, the battery can be stopped charging or keep on floating charge for half an hour.
SKU: 6443
There are no reviews yet.