Pack of 10 Element 30W,40W,60W,100W
830 Series Element
30W,40W,60W,100W
- Fast Heat
- High Temperature
- Made with High Quality Material
- Voltage: 220 ~ 50Hz
₨1,000.00 – ₨2,000.00
Based on 0 reviews
Be the first to review “Pack of 10 Element 30W,40W,60W,100W” Cancel reply
Related products
-
Battery Chargers
MA-1250A Battery Charger
0 out of 5(0)MA-1250A Battery Charger
Features:
- Three-phase charging mode
- Constant current mode: When the voltage of the battery is lower than the value set by the charger, the charger will work under the constant current mode and supply the constant current for the battery.
- Constant voltage mode: Using the pulse width modulation(PWM) tech to control the charging current and output voltage of the charger which ensures the battery is fully charged and avoids over charging.
- Floating charge mode: When the voltage of the battery is approaching the value of the constant voltage mode, and the current will cut down to the given current gradually, that means the battery power is full, then the pilot lamp will turn green and the fan will stop working. The charger will turn the mode into floating charge mode automatically. At this moment, the battery can be stopped charging or keep on floating charge for half an hour.
SKU: 5691 -
Hybrid & Solar Inverters
SAA-1500A
0 out of 5(0)SAA-1500A
Features:
- DC 5V 1A USB Interface
- Reverse battery + – protection
- 1500 watt 12v to 230v
- High conversion efficiency,smart soft start function
- Multiple safe protections
- Input and output are completely independent
- Smart, light,and portable,designed for home use
- Universal socket, suitable for all kinds of plugs
- Modified/Square waveform output
- Applicable for resistive loads
- High-procision voltage stability technology
- Aerospace-grade silence technology
SKU: 1865 -
Soldering Irons & Soldering Tools
SE-9130 IRON
0 out of 5(0)1. Keep the tip head is always hanging tin.
2. Soldering not strong acidic flux.
3. Can not with a file or a hammer to repair file and beat the tip head.
4. In the non-wetting occurs, the application of fine sand leather polish tip, and then the flux infiltration on tin; on the tin when the tip temperature is controlled at about 250 ?C best.
5. Soldering iron power use is strictly prohibited disassemble parts of its electric part.
6. The use of the electric iron, should be equipped with natural radiation structure of the iron seat and placed in the Iron Block.
7. If the power cord is damaged, to avoid danger, to be replaced by the manufacturer, or the maintenance department or similarly qualified persons.
8. This product is subject to ground the device, please pick for the safety.
SKU: 3778394
There are no reviews yet.